crafthaus

contemporary art, design and fine craft connection

Both here on crafthaus and at Luke & Eloy Gallery, I often encounter wonderful artwork. Unfortunately, sometimes this artwork is really great, but the photo does not do the work any justice. In fact, the photo can be so "bad" that it puts the work in a terrible light, and thus diminishes its prospects at being considered for a show - or for being considered to go online at crafthaus. Magazines and other publications are faced with the same dilemma.

I know that there are plenty of books out on the subject, and often they are very technical and hard to understand. I hope to spark a conversation amongst those who seek advice and those who can give it, simply because they have been there, done that.

Please join me in adding information, ask questions and/or correct me where I am wrong. Thank you.

These are my "helpful hints" for the do-it-yourselfer:

1) Use a really good digital camera, preferably one with a macro lense, which enables you to take jewelry pictures from up close. If you don't, no matter what you do, your images will end up blurry, and therefore unusable.

2) Use good lighting. I take all of my pictures myself, not that they are so great, but just to show you that it can be done :-). I always use natural light, setting everything up next to a window, but without direct sunlight shining in. Most professionals would probably advise against that, preferring other setups, but this low-tech approach works for me.

3) Photograph one piece at a time, as close up as you can, and try to keep the image "straight" and centered, no angles and try to avoid distracting backgrounds such as grass, fabrics and so forth.

4) Photoshop, photoshop, photoshop. Adjust contrast, colors etc. A "white" picture looks better than a "yellow" one.

5) If all else fails, try to have some key pictures of your work photographed professionally (we do have photographers on crafthaus that you can contact - and I hope they'll chime in), at least have a few really great images of your work readily available to show.

6) Experiment: Take a look at other images that you see online and in publications, note what it is you like about them, then try to replicate that set up/effort.

It is a learning experience for sure, but it can be done !!

I look forward to your questions and comments. Thank you !

Brigitte

Tags: artwork, how-to, image, jewelry, photo, photographer, scale, small

Share

Reply to This

Replies to This Discussion

YOU HAVE DISCOVERED THE MAGIC THAT MAKES IT ALL HAPPEN!

:) Yeah, love the risers. Usually they can't be seen as I clip the black fabric (aka an old sheet) around the frame. This keeps the underneath lighting from bleeding out where I don't want it and has the added benefit of covering up my homemade risers if a client ever comes over in the make believe future I have in a corner of my head. Actually, a few artists have already approached me to do shots but I tell them I am not quite ready and refer them to a pro.

BTW- Did you notice that at the ends of each leg is an upside down solar garden light top? After the landscapers destroyed them last year I had to find a way to re-purpose them :)

Reply to This

That's great, you are Re-Purposing. It's all the rage now.

Reply to This

Hi Brigitte-A fellow artist just parted with way too much money for some horrible pictures of her gorgeous jewelry. I don't know what recourse she has as she did not sign any contract with this photographer.

Any suggestions for a photographer in the Phoenix/Scottsdale Arizona area?
Sincerely,
Laura Lang
3circlestudio@gmail.com or lslang@cox.net

Reply to This

I recommend that this person go back to the photographer and ask for a reshoot. She/he needs to supply specific criticism about what is wrong with the photos and how to improve them. The photographer doesn't want bad "word of mouth" or a poor recommendation.
The complaints need to written down in very polite language.

The Professional Guidelines has two new documents that might help with developing a structured critique for the photos.
Two new documents are:
GUIDE TO PROFESSIONAL QUALITY IMAGES
http://www.harriete-estel-berman.info/profguidelines/qualityimage.html


WORKING WITH DIGITAL IMAGES EFFFECTIVELY
http://www.harriete-estel-berman.info/profguidelines/digitalformat....

To find a photographer, did you look on the SNAG Web site. www.snagmetalsmith.org. There is a list of photographers.
Another idea is to go to a local school and ask around for a person interested in a job.

Reply to This

We agree with Harriete. "Bad" photography is most often the result of the photographer not understanding the expectations of the customer. Almost all professionals will reshoot if you are also professional, polite and specific about what needs to be corrected, as Harriete said, in writing.

Be aware that it is your responsibility to communicate your expectations to the photographer up front if you want a specific style of lighting, composition, background, etc. Expect to pay an additional fee (usually a % of the original fee) if the reshoot is based on meeting specifications not communicated in the original shoot.

That said, photographing jewelry is a very specialized niche of photography. Not all photographers have the equipment and experience to do it. Best practice is to look at the photographer's portfolio for jewelry experience prior to contracting them. Ask specifically to see samples of jewelry photography. If they don't have any, or you are not impressed by what they show you... find another photographer.

Reply to This

I hire professional photogs to do the large stuff and take photos myself of the smaller stuff. Sometimes I even use a scanner for jewelry and it looks as good as the professional photographs I have paid hundreds for.

Reply to This

RSS

About

Gallery Spotlight

Cinema Gallery

*************************

CRAFT ALLIANCE

*************************

Luke & Eloy Gallery

*************************

SIENNA GALLERY
*************************

Velvet da Vinci

Badge

Loading…

Forum

2Roses

What the hell is Conceptual Jewelry?

Started by 2Roses in Craft Dec 23.

Thomas Skaggs

Seeking Steel Rope Fittings 4 Replies

Started by Thomas Skaggs in Other. Last reply by 2Roses Dec 15.

Prisha Brown

Textile and Jewelry Education 2 Replies

Started by Prisha Brown in Teaching and Learning. Last reply by Prisha Brown Dec 8.

2Roses

An embarrassing little snag 3 Replies

Started by 2Roses in Business Perspective. Last reply by Dana Singer Dec 11.

2Roses

A backhanded compliment? 16 Replies

Started by 2Roses in Topics. Last reply by Catherine Bemis Dec 12.

Thomas Skaggs

Jewelry Box Design Help Needed 10 Replies

Started by Thomas Skaggs in Tips, Tricks & How To's. Last reply by Pippit Carlington Nov 8.

2Roses

Show and Tell Just for Fun 11 Replies

Started by 2Roses in Craft. Last reply by Pippit Carlington Nov 8.

Peter Janík

Value of artist - value of brand name 1 Reply

Started by Peter Janík in Business Perspective. Last reply by Lisa M. Johnson Dec 9.

Harriete Estel Berman

How do you PRICING your work? 8 Replies

Started by Harriete Estel Berman in Business Perspective. Last reply by Heather Grandmont Oct 13.

Ed Ledner

My solder station vent system 3 Replies

Started by Ed Ledner in Tips, Tricks & How To's. Last reply by Duffy Designs Nov 20.

2Roses

Big Changes in How Jewelry is Sold 5 Replies

Started by 2Roses in Business Perspective. Last reply by erin dennis Nov 15.

Harriete Estel Berman

Searching for art business advice?

Started by Harriete Estel Berman in Business Perspective Sep 5.

2Roses

Art Fraud 4 Replies

Started by 2Roses in Business Perspective. Last reply by Harriete Estel Berman Sep 5.

Stephen Saracino

Metal Artists and their work around the idea of terrorism. 6 Replies

Started by Stephen Saracino in Teaching and Learning. Last reply by Sonia Beauchesne Oct 11.

2Roses

The Aesthetics of Repulsion 36 Replies

Started by 2Roses in Craft. Last reply by Creative Glassworks, Inc. Nov 11.

Listings: Workshops, Services...

© 2009   Created by Brigitte Martin

Badges  |  Report an Issue  |  Privacy  |  Terms of Service