drusy love

art clay silver setting with cobalt titanium drusy and traditional bezel

Comment

You need to be a member of crafthaus to add comments!

Join crafthaus

Comment by Janet Alexander on April 15, 2011 at 1:23am
Way cool! I bet that made your year! I've had the oil paste not work for me. What is your secret? I allowed it to dry for several days,  and then fired it per the instructions, and it didn't work. I hate the warpage from firing all at one time. i even cut a hole in the top layer, but still get warpage.
Comment by Lis-el Crowley on March 24, 2011 at 11:41pm
By the way, this is my "celebrity" piece. The actor Joe Pantoliano purchased it from me along with another piece when I met him at a retreat center last year. It was very exciting for me.
Comment by Lis-el Crowley on March 24, 2011 at 11:39pm

Hi Janet,

I always cut a decorative hole behind where the stone is going. the piece does tend to dome a bit, but not too much.

I also do bezels by prefiring the base, then attaching the bezel using art clay oil paste and firing a second time. That method eliminates all warpage.

Comment by Janet Alexander on March 23, 2011 at 9:21am
It isn't warped like most metal clay that has a fine silver bezel in it. What is your secret?
Comment by Lis-el Crowley on March 22, 2011 at 3:24pm
Hi Janet. Thanks for the compliment. It's made with fine silver bezel wire which was embedded into the metal clay and fired in place. Then I brushed, polished and patina'd the piece before setting the stone.
Comment by Janet Alexander on March 22, 2011 at 2:40pm
Nice design! What did you use for the bezel?

Treasures from Taiwan - a crafthaus online exhibition...

Treasures from Taiwan - a crafthaus online exhibition shows contemporary metal art and jewelry from 11 Taiwanese contemporary emerging artists. Treasures from Taiwan will be highlighted on Crafthaus as an online exhibition from May 8 to June 7, 2013.

Curator: Heng Lee

Latest Activity

Kelly M Nye is now friends with Evin Dubois and kelly jean conroy
1 hour ago
Profile Iconaka jewellery and Avery Lucas are attending The Society of Arts and Crafts's event
Thumbnail

Call for Entry - CRAFTBOSTON Holiday 2014 at Hynes Convention Center

December 5, 2014 at 10am to December 7, 2014 at 5pm
The Society of Arts and Crafts is pleased to announce that the application period for Craftboston Spring 2014 and Craftboston Holiday 2014 opens on May 30th. Presented by The Society of Arts and Crafts, Craftboston Spring and Holiday are New England’s premiere juried exhibitions and sales of contemporary craft. They are mission-driven events that serve to support excellence in crafts by encouraging the creation, collection, and conservation of the work of craft artists, and by educating and…See More
12 hours ago
Profile IconHeather Bayless and Jan Smith joined Rebecca Rose's group
Thumbnail

Showing Publicly and Building a Legacy Privately

For the next 13 months we'll discuss the trials, triumphs, and tribulations of exhibiting  in art shows as emerging artists and established artists. Exhibition coverage will be balanced with tips on how to strategically build a legacy over a length of time, in a way that makes sense to your individual goals as an artist. Join us each month! There will be surprises around every corner, with photos, videos, SNAG conference coverage, and occasional interviews by rising artists!See More
23 hours ago
The Society of Arts and Crafts posted events
23 hours ago
Steve Shelby left a comment for John Lunn
"Hi John. I love your flute. I worked at a job for 23 years making keys and the metal parts for contrabassoons. Unfortunately, there was no creativity involved. The upside is that I learned a huge amount about working with metal and making tools."
yesterday
Evin Dubois and Deanna Rae Poelsma are now friends
yesterday
Steve Shelby and John Lunn are now friends
yesterday
John Lunn replied to John Lunn's discussion SNAG Toronto part 4 in the group Tapestry of Talents: Bringing Your Whole Voice to Your Craft
"It is a good article. It's a bit disappointing that the 3 artists they interview are men when it was so obvious that 90% of the Trunk Show exhibitors were women. I'd like to do a blog or two on the influence of women in the arts and how it…"
yesterday
Steve Shelby commented on Rebecca Rose's group Showing Publicly and Building a Legacy Privately
"Hi Rebecca. I have had probably a 50% success rate entering juried exhibitions, which I think is actually pretty good. I don't do shows where you go and peddle your wares from a booth. The exhibitions I've been in are held in art museums…"
yesterday
Carlo Giovanni Verda liked Kate Furman's photo
yesterday
Carlo Giovanni Verda liked Judy Belcher's photo
yesterday
Carlo Giovanni Verda posted a photo
yesterday
Brigitte Martin replied to John Lunn's discussion SNAG Toronto part 4 in the group Tapestry of Talents: Bringing Your Whole Voice to Your Craft
yesterday
Brigitte Martin posted a status
"Great article about the SNAG conference: http://ning.it/12BamWC"
yesterday
Joshua Craig posted photos
yesterday
Vickie Hallmark commented on Peggy Potts's photo
Thumbnail

No Place Like Home Brooch

"Interesting conference - I learned a lot. My favorite presentations were historical - one on innovations in tool capabilities since antiquity and the resulting impacts on jewelry, another on the development of manufacturing equipment for the jewelry…"
yesterday

New blog ...

Showing Publicly and Building a Legacy Privately

- by Rebecca Rose. 2013, SNAG/crafthaus Scholarship Recipient

For the next 13 months we'll discuss the trials, triumphs, and tribulations of exhibiting  in art shows as emerging artists and established artists. Exhibition coverage will be balanced with tips on how to strategically build a legacy over a length of time, in a way that makes sense to your individual goals as an artist and maker. 

Join us each month! There will be surprises around every corner, with photos, videos, SNAG conference coverage, and occasional interviews by rising artists!

FOLLOW ALONG...leave your comments and questions.

© 2013   Created by Brigitte Martin.

Badges  |  Report an Issue  |  Terms of Service