Offered a showing in the Cedarburg Museum of Art show of relief prints, I set the metal down and picked up the woods. I have learned that readying for a show of this size is a lot harder than the cutting and printing OF the…See More
"Here is some advice.... Pierce out your design in your piece. Cover the inlay metal with sharpie all over, then use a scribe to scribe out the design in the metal. You will see the bright metal showing through the sharpie. Saw on the out side of the…"
"The SuperGlues seemed to let go with vibration of the center punch, drilling, or sawing. Double face tape is on my list to try again, but I will look into what manicurists have available to them. A good stick with flexibility would be good. Thanks!"
"OK, I have no idea if this will help with the sawing two pieces of metal. But, I was reading a story about turtles, and they wanted a way to keep the micro chips attached to their shells. A manicurist suggested the glue they use to attach nails.…"
Place of Work ? Example: Studio, College, Gallery, Museum, ...)
my own studio
I am a .... Example: Student, Maker, Educator, etc.
The biggest thing I ever made of note is a 16 foot paddlefish for a National Endowment for the Humanities grant documentary...
and the smallest thing of note is a spoon featured in Victoria Lansford's DVD about Eastern Repousse.
Your website, DIRECT flickr or DIRECT facebook links where your work can be seen.
Offered a showing in the Cedarburg Museum of Art show of relief prints, I set the metal down and picked up the woods. I have learned that readying for a show of this size is a lot harder than the cutting and…
Thanks for signing up again with crafthaus. Your active membership is valid through February 15, 2018. Now that you’ve successfully re-registered you can get even more involved. This means, you’re not just getting the whole crafthaus picture... you are a part of it. Your contributions via blogs, photos, and discussions will enrich our open crafthaus environment immensely, so please let us know what’s going on in your art life! Don't hold back! If there are ever any questions or concerns, don't hesitate to email me via crafthauseditor at live dot com, I will do my best to be of help. Thanks for being a crafthaus member!
"Contemporary Applied Arts Gallery Now on show: Architectural JewelleryA showcase of bold constructed, modernist and architecturally-inspired jewellery by CAA maker members. On display until 23 September 2017.#CAAArchitecturalJewellery"
"I have been making new work for several upcoming exhibitions this autumn... Cheongju Craft Biennale, South KoreaI'm delighted to be invited by The Crafts Council and The British Council to take part in the UK Pavilion of Cheongju…"
"The Society of North American Goldsmiths (SNAG) is looking for its next Editor to oversee the editorial direction of both Metalsmith magazine and a new publication, Metalsmith Tech magazine, as well as magazine-related content on SNAG’s…"